Correct engine paint for 1969 351w
#1
I'm looking to paint my 1969 351w myself. Preferably with with spray Paint. Cjponyparts sells eastwood ceremic spray paint but it's pricey. can anyone recommend another paint?

Also the current paint is not bad but a new coat would make it look better. How do I prep r paint? Can I simply paint over existing?
Reply
#2
Are you referring to aerosol cans of paint or from a paint gun? If you like the Eastwood stuff, you can buy directly from them. It may save you a little money. For aerosol cans, most people just use something from an auto parts store, usually Dupli Color. It's probably not as good as the Eastwood paint. Check NPD, I believe they have different brands than Eastwood.

For cleaning, since you don't want to get water in the motor, I would start with solvent and a parts cleaner brush. It might be messy. If you use any type of paint thinner you might make a mess of the paint that is already on the motor. Then wipe down several times with a Grease and Wax Remover that is used to prep for paint. You need to get that from a body and paint store. I have also seen that at Oreilly's auto parts stores in quart sizes. The Grease and Wax Remover is good to have. Get a gallon if you can afford it. It comes in handy for any type of paint work, small or large.

It sound like you are just cleaning up the motor. If your motor is out and on a stand, I would replace the freeze plugs if they are old.

Best Regards,
Mike
Reply
#3
I have used VHT engine paints with good results. The '70 is painted in what they call 'Competition Blue'.
I just degreased, machine high pressure hosed off and air line blow dry.
Lasted about 5 years.
Reply
#4
thanks i think i am going to by duplicolor old ford blue or match up another blue from advanced auto parts for $5.50. The eastwood paint is too expensive at $30. Vht is also available at advanced parts.
Reply
#5
Duplicolor makes a great product. I used it on my interior and was very pleased with the results. Also a big fan of the VHT paint...great stuff and very durable.
Reply
#6
For a very acceptable finish on factory exhaust manifolds have them sand blasted and use VHT Hi Temp, Cast Iron colour. Lasts about 4 years on a DD.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Need paint match advise from expert auto painter rindel 2 5,832 06-07-2020, 11:55 PM
Last Post: Mustangmike
  1969 Mustang Paint Codes & Colors Mach 1 Club 20 46,150 03-28-2019, 02:46 AM
Last Post: BLACK JADE 69
  1969 Mustang cleaning tips and tools Mach 1 Club 3 12,804 08-17-2015, 06:32 PM
Last Post: Mach1FatherFigure
  1969 mach1 addressing roof drip rails rindel 11 28,688 02-25-2015, 08:51 AM
Last Post: Mustangmike
  1969 mach 1 door alignment after rebuilding hinges rindel 11 31,499 12-15-2014, 11:03 AM
Last Post: SWPruett
  1969 Mach 1 Chin Spoiler Knobby 69 12 32,760 05-27-2013, 02:32 PM
Last Post: WKR
  1969 Factory Decals ? Knobby 69 4 13,393 01-01-2012, 07:28 AM
Last Post: Mach 1 Club
  Converting Glue-In Windows to Bolt-In 1969-1970 Mustangs Mach 1 Club 1 13,879 09-01-2011, 10:57 AM
Last Post: 1969jimmach
  1969 mustang weatherstrip installation 1969jimmach 0 7,161 08-31-2011, 12:15 PM
Last Post: 1969jimmach
  1969 Mustang Quarter Panel Replacement Mach 1 Club 0 7,436 07-22-2011, 03:55 AM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238018
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150589
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1677
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3953
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1992
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1464
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 156971
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2990
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1497
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1468
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8681
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1718
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3402
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21014
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15074

>